Table of Contents
Advertisement
System Hardware
4. Simultaneously press down the right end of the locking mechanism and push the
left end gently forwards to lock it into the hole at the end of the rack rail. The
installation of the cable arm is completed at this point. Users may tidy the server
cables up and tie-wrap them to the cable arm.
5. A screw-knob is designed for users to adjust the angles (up or down) of the cable
arm. Use a screwdriver to turn the screw-knob clockwise or counterclockwise and
the cable arm will go up or down.
6. Users may disassemble the cable arm following the above procedures in reverse
order.
2-21
Advertisement
Table of Contents
