Table of Contents
Advertisement
MS-9246 1U Rackmount Server
CPU Installation Procedures for Socket 604
1. Please turn off the power and
unplug the power cord before
installing the CPU.
2. Pull the lever s ideways away
from the socket. Make sure to
raise the lever up to a 170-de-
gree angle.
3. Look for the gold arrow. The gold
arrow should point towards the
lever pivot. The CPU can only fit
in the correct orientation.
4. If the CPU is correctly installed,
the pins should be completely
embedded into the socket and
can not be seen. Please note
that any violation of the correct
in s tal lati on p roc edur es m ay
cause permanent damages to
your mainboard.
5. Press the CPU down firmly into
the socket and close the lever.
As the CPU is likely to move while
the lever is being closed, al-
ways close the lever with your
fingers pressing tightly on top of
the CPU to make sure the CPU is
properly and completely embed-
ded into the socket.
3-4
Open Lever
Sliding
Gold arrow
Gold arrow
Gold arrow
Close
Press down
Lever
the CPU
Plate
Correct CPU placement
O
Incorrect CPU placement
X
Advertisement
Table of Contents
