Table of Contents
Advertisement
MSI Reminds You...
1. Mainboard photos shown in this section are for demonstration only.
The appearance of your mainboard may vary depending on the model
you purchase.
2. If you intend to install only ONE graphics card, make sure that your
graphics card is Installed on the PCI_E1 (Primary) slot.
3. If you intend to install TWO SLI-ready graphics cards, make sure that
these two graphics cards are of the same brand and specifications.
4. Only Windows XP OS supports the SLI function.
2. After the hardware installation is completed, restart the system and install
the NV SLI driver/utility to graphics cards. A configuration panel will be provided for
Multi-GPU control. Check the Enable multi-GPU box to enable the SLI function for
the onboard graphics cards (concerning the details of multi-GPU settings, please
refer to your graphics card manual) .
Check the box.
Fig.1
Hardware Setup
SLI bridge
E-2-27
Hide quick links:
Advertisement
Table of Contents
