Table of Contents
Advertisement
5. The CPU socket has a plastic cap on
it to protect the contact from damage.
Before you have installed the CPU,
always cover it to protect the socket
pin.
7. Lift the load lever up and open the
load plate.
9. Use your thumb and the middle fin-
gers to push the clips to release the
CPU, then press down the CPU with
your index finger to allow the whole
module to be installed onto the CPU
socket.
6. Remove the cap from lever hinge side
(as the arrow shows). The pins of
socket reveal.
8. Correctly align the triangle of CPU Clip
with the CPU chamfer, and the square
on the CPU Clip to the hook of the
socket.
10. The CPU is installed well on the CPU
socket.
Hardware Setup
E-2-5
Hide quick links:
Advertisement
Table of Contents
