Installing Dimms - Kyocera Mita Ecosys FS-1800+ Operation Manual

DIMMs to be used
See your Kyocera Mita dealer for purchasing information of the DIMMs
that are best suited for use with this printer.
16 MB, 32 MB, 64 MB, and 128 MB DIMMs can be used for memory
expansion.
Installing and Removing the DIMM

Installing DIMMs

Insert the DIMM into the socket as shown below.
1
Remove the DIMM from its package.
2
Open the clips on both ends of the DIMM socket.
3
Insert the DIMM into the socket, so that the notches on the DIMM
align with the corresponding protusions in the socket.
4
Close the clips of the DIMM socket to secure the DIMM.
5
When you finish installing the DIMM, reinsert the main circuit
board into the printer by reversing the removal procedure.
Clip
DIMM
B-5
Expanding the Printer Memory
Clip
Socket