Kyocera Mita Ecosys FS-1800+ Operation Manual page 112

Using the Operator Panel
ENTER
ENTER
ENTER
MENU
13
Press the ENTER key. A blinking cursor (
>>X Dimension
14
Press the or
where the cursor is blinking and display the desired width. The
width can be set between 148 and 216 mm (5.83 to 8.5 inches). You
can use the > and < keys to move the cursor right and left.
Enter the paper size for X Dimension and Y Dimension as shown in
the figure.
148 to 216 mm
(5.83 to 8.5 inches)
If you want to abandon the setting procedure, press the CANCEL
key.
15
Display the paper width and press the ENTER key.
16
When the width is set, press the
(the paper length setting). Set the desired length in the same way as
the width. The length can be set between 210 and 356 mm (8.27 to
14.02 inches).
17
Display the paper length, press the ENTER key.
18
Press the MENU key. The message display returns to Ready.
To print using the custom size set above, define the same custom size
on the printer driver. For details, see
Printer Driver
1-100
216 mm
key to increase or decrease the value of the figure
X Dimension
key. >>Y Dimension appears
Guide.
) appears.
3.1.1 Custom Size Setting
in