Kyocera Mita Ecosys FS-1800+ Operation Manual page 144

Using the Operator Panel
MENU
?
ENTER
Setting the Auto Continue Recovery Time
Follow the procedure given below to change the recovery time for Auto
Continue.
1
Press the MENU key.
2
Press the or
Others
3
Press the > key.
4
Press the or
appears.
>Auto Continue >
Mode On
5
Press the > key and display >>Auto Continue Timer.
6
Press the ENTER key. A blinking cursor (
>>Auto Continue
Timer
1-132
key repeatedly until Others > appears.
>
key repeatedly until Auto Continue Mode >
000Sec.
) appears.