Auto Center; Continuous Scanning - Kyocera KM-C2525E Advanced Operation Manual

Auto Center

Configure Auto Center for default settings mode. The setting items are as follows.
Item
On
Off
For further details about Auto Center, see page 4-9.
1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2 Press [ ] or [ ] to select Auto Center (Image shift) and press [Change #].
3 Select [On] or [Off].
4 Press [Close]. The display returns to the Setting default function screen.

Continuous Scanning

Use the same settings from a previously completed transmission for the next transmission. The
scan function screen is returned with the sender (user), destination and other settings remaining
from the previous operation.
Item
On
Off
NOTE: To switch to continuous scan
from the scanner function screen, press
[Cont. TX to]. When continuous scan is
enabled, [Cont. TX to] changes to
[Single Scan]. To enable Single Scan,
press [Single Scan].
If Permit File Overwrite is checked in
Scanner File Utility (see page 6-7), files
with already existing names will be
overwritten. Exercise caution when
inputting file names during Continuous Scan mode.
When finished using Continuous Scan, always [Cancel] on the scanner function screen. If not
pressed, the scanner function screen may remain active, rendering the copy, print or fax functions
unusable. Also, exercise caution as unauthorized users may obtain access to the device while this
screen is displayed.
1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2 Press [ ] or [ ] to select Continuous Sending and press [Change #].
3 Select [On] or [Off].
4 Press [Close]. The display returns to the Setting default function screen.
Description
Enables Auto Center.
Disables Auto Center.
Description
Enables Continuous Scan.
Disables Continuous Scan.
Scan to PC-Sending
Destination
Save at
User PC
Ready to scan.
Place the original and select destination.
Delete
Address
Book
Scanner Settings
( Full-Color ) Original
11×8½"
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Select Scanning
Send Size Resolution
Basic
Quality
4-17
08/0