Auto Continue - Kyocera KM-C2525E Advanced Operation Manual

Printer Settings
Setting Resource Protect Mode
When this devicer's emulation switches from PCL 6 to another emulation type, all downloaded files
and macros are lost. Set the Resource Protect Mode to Protect or Permanent to protect the PCL
environment and preserve those resources for use when again returning to PCL 6 emulation.
Item
Auto
Protect
Off
1 Press the Printer key.
2 Press [Printer Menu].
3
Press [Others].
4 Press [ ] or [ ] to select Resource
Protect and press [Change #].
5 Press [Off], [Permanent] or [Permanent/Temporary].
6 Press [Close]. The display returns to the Others screen.
7
Press [Close]. The display is returned to the Printer menu screen.

Auto continue

When an error occurs, automatically continues printing from the next received data after the
specified period of time. The default setting is [Off] (No auto continue). Auto continue can continue
printing after the following errors.
•
•
You can also specify the time delay before Auto continue.
1 Press the Printer key.
2 Press [Printer Menu].
3-42
Description
Saves permanent PCL resources such as fonts, macros, and symbol sets in this
device's memory when switching emulation types. Temporary resources,
however, are released.
Saves permanent and temporary PCL resources in this device's memory when
switching emulation types.
No resources are protected.
Print Overrun Press GO.
Memory overflow Press GO.
item.
Paper
Font
Handling
Color Mode
Page Set
Print RAM DISK
Quality Mode
Others
Setting Item Value
Form Feed Time Out 30. Sec.
Resource Protect Permanent
Auto Continue Off
Finishing Error
Printer menu
Close
Others
Change # Service