Erasing Borders; Selecting Maximum Number Of Copies; Enabling Repeat Copy - Kyocera KM-C2525E Advanced Operation Manual

System Menu
3 Press [ ], [ ], [ ] or [ ] to set the margin width.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default
screen.

Erasing Borders

Set the border erase default values. The setting ranges are as follows.
Model Type
Inch models
Metric models
For further details about border erase, refer to page 1-19.
1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen.
2 Press [ ] or [ ] to select Default erase width and press [Change #].
3 Press [+] or [–] to set the Border (outer edges) and Center (Centre) (middle) border widths.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default
screen.

Selecting Maximum Number of Copies

Limits the number of sets that can be specified for a single copy. Set to between 1 - 999 sets.
1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen.
2 Press [ ] or [ ] to select Preset limit and press [Change #].
3 Use the numeric keys to specify the preset limit value.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Copy Default
screen.

Enabling Repeat Copy

Disable repeat copy or configure repeat copy in the default settings mode. The setting items are as
follows.
Item
Function
Default
For further details about repeat copy, refer to page 1-36.
NOTE: This setting is not displayed when the optional security kit is installed.
1 Referring to Accessing the Copy Default screen on page 7-2, access the Copy Default screen.
2 Press [ ] or [ ] to select Repeat Copy and press [Change #].
3 Under Function, select [Off] or [On].
7-10
Range
-
0 2" (1/8" increments)
0 - 50 mm (1 mm increments)
Off
On
Off
On
Description
Prevents the use of repeat copy.
Allows the use of repeat copy.
Do not enable repeat copy.
Enable repeat copy.