Print KPDL errors
When printing in KPDL emulation mode, prints details of any errors that occur. The default setting is
[Off] (Do not print).
1
Refer to steps 1 to 4 of Emulation Mode Selection on page 3-10 on page to display the Emulation
screen.
2
Press [KPDL] or [KPDL (Auto)].
3
Press [Print KPDL errors].
4
Press [On] or [Off].
5
Press [Close]. The display is returned to the Emulation screen.
Pen and Print Environment Setting
Specify 8 different pen thicknesses, pen color and page sizes when KC-GL emulation is selected.
Setting Item
Pen Adjust
Page Set
1
Refer to steps 1 to 4 of Emulation Mode Selection on page 3-10 on page to display the Emulation
screen.
2
Press [KC-GL].
3
Press [Pen Adjust].
4
Press [ ] or [ ] to select the pen to
configure and press [Change #].
5
Press [+] or [–] to set the pen thickness (in dots).
Selection Item
Pen (1) - Pen (8)
A2, A1, A0, B3, B2, B1, B0, SPSZ
Pen Adjust
Printer menu
On
Network
USB
1 - 99 dots
Black, Blue, Red, Magenta, Green, Cyan, Yellow,
White
On
Network
USB
Setting Item
Pen(1)
1.
dots,Black
Pen(2)
2.
dots,Black
Pen(3)
3.
dots,Black
Pen(4)
4.
dots,Black
Pen(5)
5.
dots,Black
Pen(6)
6.
dots,Black
Pen(7)
7.
dots,Black
-
Emulation
Printer Settings
Close
Alt.
Emulation
Print KPDL
errors
Close
Page Set
Pen Adjust
Value
Change #
3-11