Booklets From Facing - Kyocera KM-C2520 Advanced Operation Manual

Copy Functions
Booklets from Facing Pages
Copies book originals to booklets consisting of two-sided copies with facing pages. Booklets such
as magazines can be created by folding at the center. Also, thick paper or colored paper may be
inserted as a cover page.
You can change the cassette set as the paper to be used for the cover page. For further details,
refer to Specifying Cassette for Cover Paper on page 7-7.
NOTE: Original sizes that can be used with Booklets from Facing Pages are limited to 11 × 17",
8
11 × 8
Use the optional 3000 sheet document finisher and folding unit to bind&fold (staple down the middle
of the finished output and fold in two). For this operation, the available paper sizes are limited to
11 × 17", 8
Follow the steps as below for these booklet types.
1 Place the book original and press [Function].
2 Press [Booklet].
3
Press [Book Booklet].
4 Select the original and finished types.
5 If the optional 3000 sheet document finisher and folding unit are installed, [Saddle stitch] ([Centre
Staple]) is displayed. To set bind&fold, press [Saddle stitch] ([Centre Staple]).
Press [Bind & Fold] and press [Close].
Up to 16 sheets (64 pages) can be
processed with bind&fold.
6
To insert a cover page, press [Stitching Front Cvr] ([Stitching Front cov.]).
7 Press [Cover] and press [Close].
1-28
× 11", A3, B4, A4R, B5R, A5R, 8K, and output paper size is limited to 11 × 17", 8
1/2
", 8 × 11", A3, B4, A4, A4R, B5 and B5R.
1/2 1/2
× 14", 8 × 11", A3, B4 and A4R.
1/2 1/2
Set first page.
Press "Start" key.
Booklet
Original Finished
Book Open from
Off
Left left
Book Open from
Booklet
right
Right
Book
Booklet
Set first page.
Press "Start" key.
Saddle Stitch
No cover
Bind &
Fold
Set cover page.
Press "Start" key.
Stitching Front Cvr
No cover
Cover
× 14",
1/2
Paper Size
11×1
100%
Shortcut Back
Stitching
Set the book or
top side direct
Off
Stitching
Front cvr
Off
Saddle
Stitch
Paper Size
11×1
100%
Back
Paper Size
11×1
100%
Back
Automatically adds covers in book
binding mode using paper (color o
thick) fed from a different cassette
Load the paper for covers in the
specified cassette.