Kyocera KM-C2520 Advanced Operation Manual page 153

6
Press [Change #] for Password confirm.
7 Enter the password again for verification and press [End].
8 Press [Close]. Display is returned to PDF Encryption.
9
Press [ ] or [ ] to select Encryption
Level and press [Change #].
10 Select [High Level 128bit] or [Low Level 40bit] and press [Close]. Display is returned to PDF
Encryption.
Proceed to Step 11 if a password was entered in Step 3 for Doc. Restriction Password.
Proceed to Step 17 if a password was entered in Step 3 for Document Open Password.
11
Press [ ] or [ ] to select Copy image and other cont and press [Change #].
12
Select [Allow] or [Refuse] and press [Close].
13 Press [ ] or [ ] to select and Changes Allowed and press [Change #].
14 Press [Comment], [Any except extract pg], [Change pg layout], [Insert/del/rotate pg], or [Refuse]
and press [Close].
NOTE: [Change pg layout] will be displayed when [Low Level 40bit] is selected for [Encryption
Level] and [Insert/del/rotate pg] will be displayed when [High Level 128bit] is selected.
15
Press [ ] or [ ] to select and Printing Allowed and press [Change #].
16 Select [Allow], [Refuse] or [Allow (Low Res.)] and press [Close].
NOTE: [Allow (Low Res.)] is displayed when encryption level is set to [High Level 128bit] under
Encryption Level.
17
Press [Close]. Display is returned to Sending file type.
Ready to scan.
Place the original and select destination.
PDF Encryption
Default menu
Document Open Password Off
Doc. Restriction Password *****.
Encryption Level Low Level (40bit)
Copy image and other cont Refuse
Changes Allowed Refuse
Scanner Settings
( Full-Color ) Original
11×8½"
Back
Setting mode
Change #
4-11
08/0