Konica Minolta Magicolor 7300 Reference Manual page 305

Command
Syntax @PJL JOB [NAME = "job name"][START = first
Description The JOB command signifies the beginning of a new PJL
Notes The ranges and default settings for the optional parameters
Command
Syntax @PJL
Description This command signals the printer to use its PJL parser to
Notes This command must always immediately follow the <UEL>
Commands
JOB
page][END = last page][PASSWORD =
number][<CR>]<LF>
job to the printer. This command should be used with the
EOJ command to frame the PJL job to prevent multiple PJL
jobs from being treated as one job.
shown in the Syntax are:
NAME
Range: ASCII 33-255,<SP>,<HT> (80 characters
maximum)
Default: N/A
START
Range: 1-2,147,483,647
Default: 1
END
Range: 1-2,147,483,647
Default: All
PASSWORD
Range: 0–65,535
Default: 0
The use of these parameters is optional.
Always use the JOB command with the EOJ command.
PJL
interpret the following command lines.
command (with no white space between these two
commands).
297