Konica Minolta Magicolor 7300 Reference Manual page 112

Configure the Port
1
Configure the
Timers.
Name
Status
Update
Interval
Status
Request
Timeout
Send
Request
Timeout
104
Default Setting
5 Seconds
10 Seconds
60 Minutes
Function
Determines how often the Crown
Print Monitor+ updates Print Manager
with status information on the printer
attached to the port.
Sets the amount of time the Crown
Print Monitor+ waits for a response
from the printer before notifying the
Print Manager that the printer is not
responding.
Sets the amount of time the Crown
Print Monitor+ waits for a print job to
be sent before it returns control to the
Microsoft Print Spooler.
" #
If this timer expires and the job
was sent via a Windows
Me/98/95 Server, the print job
is automatically terminated and
cleared from the system.
" #
If this timer expires and the job
was sent via a workstation, the
Windows Me/98/95 Print
Spooler dialog box displays,
asking for a retry or cancel
response. Regardless of your
response, the job is terminated
and cleared from the system.
Installing the KONICA
MINOLTA Crown Print
Monitor+