Konica Minolta Magicolor 7300 Reference Manual page 164

Printer Control Dialog
The KONICA MINOLTA
Printer Control dialog gives
you access to
!
Printer identification,
including installed features
of each printer
!
Printer status
!
Print job monitoring
!
Spooling configuration
!
Print management,
including
% Job holds
% Notification
% CrownView and Telnet access
The buttons on the Printer Control dialog give you access to all of the
KONICA MINOLTA NDPS component features. For additional information,
see the online help available from each dialog.
Identification
Features
Jobs
Pause Output
156
Opens the Printer Identification dialog, which displays
general information about the printer and NDPS
configuration, and allows you to select from available
Printer Control DLL Names.
Opens the Features dialog where you can access
printer configuration and support service information.
Displays a submenu that allows you to open the NDPS
Job List dialog and the Spooling Configuration dialog.
Sends a command to the server to pause printer
output. No print jobs are printed while the printer output
is paused.
After selecting Pause Output, the button is replaced
with a Resume Output button. Selecting Resume
Output removes the pause and allows print jobs to be
printed.
Using KONICA MINOLTA
NDPS Snap-in Controls