Konica Minolta Magicolor 7300 Reference Manual page 256

Gateway
DHCP/BOOTP DHCP/BOOTP: Set this setting to YES when there is a
H/W Address
Notes:
Interface/Parallel
Parallel
IO Timeout
248
If a router is used on the network, enter the IP address of
the router. Use the Up, Down, Left, and Right keys to enter
the value.
Range:
Default:
DHCP server on the network or the IP address is assigned
automatically using BOOTP.
Choices:
Default:
The Ethernet hardware address for this printer can be
displayed. (It cannot be changed.)
Default:
After the Ethernet settings are changed, the printer
automatically reboots.
INTERFACE
PARALLEL
IO TIMEOUT
10
11
.
15
.
300
If the printer is connected and used on a parallel
connection, the following setting should be specified.
Set the time for timing out when there is no data exchange
for a given time for the parallel connection.
Range: 10–300
Default: 15
000.000.000.000 to
999.999.999.999
0.0.0.0
On
Off
On
00206Bxxxxxx
Configuring your Printer via the
Printer Control Panel Menus