Pjl Command Syntax - Konica Minolta Magicolor 7300 Reference Manual

PJL Command Syntax

The characters and symbols used when identifying the syntax of PJL
commands is defined in the following table:
[ ]
< >
|
CAPS
Control Character Definitions
This table defines the control characters used in PJL command syntax.
Control
Character
<CR>
<ESC>
<FF>
<HT>
<LF>
<SP>
<UEL>
<WS>
PJL Command Syntax
Square brackets enclose any optional arguments that
can be used in conjunction with the command. If you
use optional arguments, don't type the brackets.
Angled brackets enclose control characters. When
these appear in the Syntax, enter the control code
only (don't type the <> characters). See the next
section for control character definitions.
Vertical bar appear in command syntax to indicate
that there are multiple optional parameters.
The complete @PJL command must be in uppercase.
Character
Description
Carriage Return
Escape
Form Feed
Horizontal Tab
Line Feed
Space
Universal Exit
Language
White Space
Hex
Code
0x0D
0x1B
OxOC
0x09
0x0A
0x20
0x1B 25 2D 31 32 33 34 35 58
Ox09 or Ox20
ASCII
Code
13
27
12
9
10
32
9, 32
285