Configuring Ndps - Konica Minolta Magicolor 7300 Reference Manual

10
Select Install.
The KONICA MINOLTA
Gateway and utilities
are installed.
11
When the installation is
complete, select
Finish.
12
After the installation
program closes,
remove the Software
Utilities CD-ROM and
store it in a safe place.

Configuring NDPS

The steps to configure KONICA MINOLTA NDPS components are
!
Create a Broker
!
Create a Manager
!
Create a Printer Agent
!
Setup NDPS Printers using
% Add Printer Wizard, or
% NetWare Print Manager
The following sections contain detailed instructions about these steps and
information about the printing features available through KONICA MINOLTA
NDPS components. For additional information about NDPS, refer to Novell
documentation and online help.
144 Configuring NDPS