Setup Mode; Media; (Intermec Fingerprint V8.70) - Intermec EasyCoder PM4i User Manual

Appendix E — Setup Mode Overviews

Setup Mode; Media

(Intermec Fingerprint v8.70)

Continued from
the previous page
160
SETUP:
MEDIA
MEDIA:
MEDIA SIZE
MEDIA SIZE: MEDIA SIZE:
XSTART WIDTH
XSTART: WIDTH:
[24]: [832]:
MEDIA:
PAPER TYPE
PAPER TYPE:
TRANSFER
TRANSFER: TRANSFER:
RIBBON CONSTANT RIBBON FACTOR
RIBBON CONSTANT: RIBBON FACTOR:
[90]: [25]:
PAPER TYPE:
DIRECT THERMAL
DIRECT THERMAL: DIRECT THERMAL:
LABEL CONSTANT LABEL FACTOR
LABEL CONSTANT LABEL FACTOR:
[85]: [40]:
MEDIA: MEDIA:
TESTFEED TESTFEED MODE
TESTFEED: TESTFEED MODE:
[26 28 0 10] FAST
TESTFEED MODE:
SLOW
Press <Enter> to per-
form a testfeed.
Scroll forward
Values are read-only.
Scroll back
EasyCoder PM4i Printer User's Guide (Fingerprint Version)
MEDIA:
MEDIA TYPE
MEDIA SIZE: MEDIA TYPE:
LENGTH LABEL (w GAPS)
MEDIA TYPE:
TICKET (w MARK)
MEDIA TYPE:
TICKET (w GAPS)
MEDIA TYPE:
LENGTH:
FIX LENGTH STRIP
MEDIA TYPE:
[1200]:
VAR LENGTH STRIP
Scroll forward
Scroll back
TRANSFER: TRANSFER:
LABEL OFFSET RIBBON SENSOR
LABEL OFFSET: RIBBON SENSOR:
[0]: [14]:
Only displayed if a paper sensor is installed.
MEDIA: MEDIA:
CONTRAST PAPER
PAPER:
PAPER SENSOR
CONTRAST: PAPER SENSOR:
+0% [10]:
CONTRAST:
+2% CONTRAST:
+4%
CONTRAST:
+6%
CONTRAST:
+8%
CONTRAST:
+10%
CONTRAST:
-10%
CONTRAST:
-8%
CONTRAST:
-6% CONTRAST:
-4%
CONTRAST:
-2%
Scroll forward
Scroll back
MEDIA:
LEN (SLOW MODE)
LEN (SLOW MODE):
[0]:
Continued on
the next page
TRANSFER:
LOW DIAMETER
LOW DIAMETER:
[0]:
PAPER:
LOW DIAMETER
LOW DIAMETER:
[0]: