Intermec EasyCoder PM4i User Manual page 44

Chapter 4 — Media Load
28
An optional label-taken sensor can hold the printing of the next
label in a batch until the present label has been removed, see
"Options" on page 83.
Note: Peel-off operation sets high demands on the media in
regard of label stiffness, release characteristics of the adhesive and
liner, resistance against electrostatic charging etc., so the labels
will be dispensed properly. Consult your media supplier or test
the media to ascertain that it is suitable for your application.
To perform the peel-off (self-strip) procedure
1 Open the front and side doors.
2 Turn the printhead lift lever clockwise to raise the printhead.
EasyCoder PM4i Printer User's Guide (Fingerprint Version)