Appendix A—Technical Data
Table of Technical Data
Printing
Print Technique
Printhead Resolutions
Print Speed (variable)
Print Width
Print Length (max)
Print Directions
Media
Media Width
Media Roll Diameter
(max)
Media Roll Core Diameter
Media Thickness
Transfer Ribbon
Material
Winding
Ribbon Width
Ribbon Roll Diameter
(outer)
Inner Core Diameter
Modes of Operation
Tear-Off (Straight-
through)
Peel-Off (Self-strip)
Cut-Off
Firmware
Operating System
Latin Fonts
70
Direct Thermal/Thermal Transfer
8 dots/mm (203.2 dpi) or
11.81 dots/mm (300 dpi)
50.8 to 152.4 mm/sec. (2 to 6 in/sec.)
50.8 to 101.6 mm/sec. (2 to 4 in/sec.)
25 to 104 mm (1 to 4.09 in)
25 to 106 mm (1 to 4.17 in)
1,270 mm (50 in)
558.8 mm (22 in)
4
25 to 118.0 mm (1 to 4.65 inches)
212 mm (8.35 inches)
38.1 to 76.2 mm (1.5 to 3 in)
60 µm to 250 µm (2.3 to 9.8 mils)
Wax, hybrid, or resin
Ink on either inside or outside
30 to 110 mm (1.18 to 4.33 in)
76 mm (2.99 in) equivalent to
450 m (1,471 ft) of ribbon
25.2 to 25.6 mm (1.00 inches)
Yes
Optional
Optional
ESim v5.xx
5 resident alphanumeric fonts.
Windows bitmap fonts can be down-
loaded.
Intermec EasyCoder PD4—User's Guide
1
8 dots/mm
11.81 dots/mm
8 dots/mm
11.81 dots/mm
8 dots/mm
11.81 dots/mm
At ribbon thick-
ness 8 µm