Media Specifications - Datamax PE Operator's Manual

Media Specifications

Figure F-2 Acceptable Media Dimensions
Description
A Label width
B Backing width
C Gap between labels
D Label length
E Backing thickness
F Label thickness
G Width of sensor opening
H Distance media edge to sensor
opening
I Reflective sensor mark width. It is
recommended that the entire width
of the label is marked.
J Distance between reflective mark
K Reflective sensor mark length
Table F-1 Acceptable Media Specifications
Note: The reflective sensor mark must be carbon based ink. The
infrared light will not be absorbed by a plain black mark.
PE Series Operator's Manual
Max. Min.
(inches) (inches)
5.0 1.000
5.0 1.000
99.99 0.100
99.99 0.500
0.010 0.0025
0.010 0.0025
0.500 0.170
2.250 0.200
N/A 1.000
99.99 0.500
99.99 0.100
F-5