Cleaning Schedule - Datamax PE Operator's Manual

6.1 Cleaning Schedule

The following table provides a recommended cleaning schedule for
various parts of your printer.
For your safety and to avoid damaging the Printer,
always power off and unplug the unit before cleaning.
CAUTION
Area
Printhead
Platen Roller
Media Path
Peel/Tear Bar
Media Sensor
Interior
Exterior
PE Series Operator's Manual
Using isopropyl alcohol and a cotton
swab, clean the printhead from end to
end. Removing all adhesive and dirt.
Rotate the platen, cleaning it thoroughly
using isopropyl alcohol on a cotton swab
or lint-free cloth.
Compressed air / soft-bristle brush and
isopropyl alcohol.
Isopropyl alcohol
Compressed air, isopropyl alcohol if
needed.
Soft-brush or compressed air.
Mild detergent.
Table 6-1 Printer Cleaning Schedule
Method Interval
Clean after each
roll of ribbon or
each roll of direct-
thermal labels.
Clean after each
roll of ribbon or
each roll of direct-
thermal labels.
As needed, based
on weekly visual
inspection.
As needed, based
on weekly visual
inspection.
Monthly or as
needed.
As needed.
As needed.
49