3 | Connections and Setup
Media Loading
The w1110 printer supports either a 1" core or a 1.5" core paper roll. The core adapters
can be removed, rotated and reinstalled depending on the desired core size.
Please consult your reseller to obtain the appropriate media.
1. Lift the cover latch release and open the cover.
2. Verify the core size for the paper roll being used and select the appropriate core
adapter side.
a. To change the core adapter size, gently press the locking tabs outward and
remove the media core adapters from the media support brackets.
Note:
The media core sizes are printed on the top of the core adapters.
Figure: 3 - 1 Media Core Adapters
1.5" Media
Core Adapter
b. Reinstall the core adapters with the corresponding number for the appropriate
core size facing upwards.
Workstation Series User's Guide
Locking Tabs
12