4.1 Accessing the Menu Tree
The menu is divided between basic function and advanced setup
levels. (To see a complete overview, the Menu Tree is located in
Appendix G.)
Note: Default values or settings may vary depending on the version
and customer applications. Factory default settings will be
indicated with * symbol.
4.1.1 Basic Functions
There are nine basic functions including a gateway to the advanced setup
level.
Print Method
Sensor Top of Form
Darkness
Start of Print
LCD :
From the Printer Ready screen, enter the Basic Function screen by
pressing the
Qsjou!Nfuipe
Direct
*Transfer
Tfmfdu!UPG
*Gap
Reflective
Continuous
30
UVF!!GFC14!!22;66B
!!!
SFBEZ
key :
Controls the type of print method to be used.
Enables direct-thermal printing (no ribbon).
Enables thermal-transfer printing (ribbon installed).
Controls the type of media sensing to be used.
Senses on a gap or notch between each label.
Senses on a reflective mark between each label.
Senses only presence, TOF set by label format.
Column Adjust
PE Applicator HW
Advanced Setup
PE Series Operator's Manual