Protecting A Program; Removing Program Protection - Ricoh 5490 Operating Instructions Manual

Protecting a Program

If you want to prevent someone from
writing over your program, do the
following:
A
Press the { { { { Program} } } } key.
B
Select [Protect] with the [→ → → → ] or
{ { { { } } } } } } } } key.
C
Press the [OK] key.
D
Select the program number you
want to protect with the [← ← ← ← ] [→ → → → ]
or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
Note
❒ Already
protected
n umbers are shown w ith a
black background (e.g. A).
❒ You can also select the program
number with the number keys.
E
Press the [Select] key.
F
Press the [OK] key.

Removing Program Protection

A
Press the { { { { Program} } } } key.
B
Select [Protect] with the [→ → → → ] or
{ { { { } } } } } } } } key.
C
Press the [OK] key.
D
Select the program number you
want to remove protection from
with the [← ← ← ← ] [→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
program
Programs
1
71