Ricoh 5490 Operating Instructions Manual page 398

User Tools
No. Mode
10 Cancel Comb.
11 No. of Skip Feed
4
12 Idling for Q.start
13 Setting Q.start
14 No. of Q.start
148
Description
Specifies whether Combine Originals or Memory Combine mode
is cleared after finishing your print job.
Note
❒ Default: Not to cancel
Specifies the number of drum rotations in Skip Feed mode at
power on. You can also select whether you can change the num-
ber of drum rotations temporarily when you press the { { { { Skip Feed} } } }
key. See p.71 "Skip Feed Printing".
Note
❒ Default:
• Panel display: Display
• Number of Skip Feed: 2
Reference
For changing the number of rotations, see p.159 "4-11 No. of
Skip Feed".
When you use the Manual Quality Start mode, you can select
how many times the drum unit idles.
Note
❒ Default: 7
If the machine is not used for a long period of time, the ink on the
drum might dry causing image quality to deteriorate. The Auto
Quality Start mode automatically recovers image density quality
after a selected time has passed. If Auto Quality Start mode is set
to "Not to use", you can regain print quality by making a few ex-
tra prints or you can use the Manual Quality Start mode.
Note
❒ Default:
• Before print: Yes
• After print: Yes
You can select how many times the drum unit idles after the dis-
played time periods have passed in Auto Quality Start mode.
Note
❒ Default: See p.160 "4-14 No. of Q.start".
❒ To increase the print image density, increase the number of
drum rotations, and vice versa.
Reference
For changing the number of idle spins, see p.160 "4-14 No. of
Q.start".