Ricoh 5490 Operating Instructions Manual page 111

Note
❒ Make sure there is no break in the line.
❒ Draw the line at least 2mm, 0.08", away from the image so that the whole
image can be recognized.
a = Line marking the designated area
b = 2mm, 0.08"
c = Image within the designated area
❒ The line marking the designated area should be more than 2mm, 0.08",
from any neighboring image.
a
d
a = 2mm, 0.08"
b = Neighboring image
c = Line marking the designated area
d = Image within the designated area
b
c
GRCOMM4E
Command Sheets for Make-Up Printing
1
91