Ricoh 5490 Operating Instructions Manual page 422

Troubleshooting
Message
Print image is larger
than the selected paper
size.
Change the paper size.
- When a service call message is shown on the panel display - - -
Press the [Exit] key. Then turn the main switch off and back on again. If a service
code appears again, contact your service representative.
Note
5
❒ If a service code appears on the panel display after you turn the main switch
off and on a few times, do not continue turning it on and off. Leave the ma-
chine off.
❒ When you make masters continuously using originals with solid images,
"SC-03-03" tends to appear on the panel display. In this case, turn off the main
switch and wait for a while. Then turn on the main switch.
172
Meaning
The master image previously printed is larger than the paper, the
image exceeds the paper size.
Make prints again after pressing the [Exit] key and selecting the pa-
per size again.
Note
❒ If you press the [Exit] key to erase the message and press the
{ { { { Print} } } } key, the machine starts to make the prints. However, the
image might not fit on the paper.