Ricoh 5490 Operating Instructions Manual page 110

Operation
❒ The line marking the designated area should be more than 2mm, 0.08",
from any neighboring image.
1
a, b, c = 2mm, 0.08"
Closed area method
Note
❒ The line designating the area must be a closed loop.
A
Put the command sheet on top of the original.
B
Using a black, red, or blue felt tip pen, draw a line around the area to des-
ignate. The line should have a thickness of at least 1mm.
90
a
b
c
GRCOMM2E
ZM-20
ZM-26