Audio Controls - JBL AV2 User Manual

Audio Controls and Video Status

AUDIO CONTROLS

Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu. All of the Audio Controls interact with the AUTOCAL settings, except for the
Audio Status parameter.
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
SETUP
AUTO EQ
AUDIO CONTROLS AUTO EQ: ON
If the AUTOCAL process is performed and the settings are saved,
then the Auto EQ parameter identifies if the saved AUTOCAL
settings are being actively applied to the system. When the Auto EQ
parameter is OFF, the AUTOCAL settings are not applied.
Note: When the AUTO EQ parameter is set to OFF, the EQ ADJUST
parameter is also not applied.
EQ PRESET
EQ PRESET
AUDIO CONTROLS
Identifies the three preset locations where the AUTOCAL settings
are saved, and displays the state of each preset (saved or unused).
The Active PS, or Active Preset, parameter identifies the preset
4-2
AUDIO CONTROLS
AUTO EQ: ON
EQ PRESET
EQ ADJUST
TONE CONTROLS: OFF
BASS: 0dB
TREBLE: 0dB
AUDIO STATUS
OFF, ON
PRESET 1, PRESET 2, PRESET 3, USER
EQ PRESET
EQ ADJUST
ACTIVE PS: USER
PRESET 1: FACTORY
HF SHELF: 0dB
PRESET 2: FACTORY
PRESET 3: FACTORY
AUDIO STATUS
INPUT: HD+
NAME:
CONNECTOR: ANALOG 3
AUDIO: - - -
MODE FAMILY: LOGIC 7
MODE: MUSIC 5.1
location that is currently active if the AUTO EQ parameter is set to
ON for any input. The Active Preset can be set to any of the three
saved preset locations.
The Preset locations cannot be selected and are present only to
identify the current state of each location. If the location indicates
"SET", then the preset location has AUTOCAL settings saved to it. If
the location indicates "FACTORY", then the preset location has not
been used and remains at the default factory settings.
Note: If all three Preset locations indicate "FACTORY", then the AUTOCAL
procedure has not yet been done, or at the least, the settings have not been
saved.
For more information on the AUTOCAL process, refer to Section 3:
Setup.
Harman Consumer Group, Inc.