Dolby Configuration - JBL AV2 User Manual

Performance series audio/video processor
Table of Contents

Advertisement

Setup

DOLBY CONFIGURATION

Selecting the SETUP menu, DOLBY CONFIG option opens the Dolby Configuration menu, which is used to configure the Dolby surround modes
for optimum performance.
MAIN MENU
SETUP
DISPLAY SETUP
AUDIO CONTROLS
VIDEO STATUS
SPEAKER/EQ SETUP
SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
BASSQ*: NO
*CHECK MANUAL FIRST
Note: The Dolby Configuration only applies to the Dolby PLII Music and
Dolby PLIIx Music listening modes. The Dolby Pro Logic IIx mode requires
a 7.1-channel configured system.
MODE
MODE
SETUP
DOLBY CONFIG
Selects the MODE parameter, which chooses between the Dolby PLII
Music and Dolby PLIIx Music listening modes.
CENTER WIDTH
CENTER WIDTH
SETUP
DOLBY CONFIG
Adjusts the balance of the vocal information in the front soundstage
between the center and front left/right speakers. The higher settings
spread the center channel sound more broadly into the left and right
channels, while a lower number produces a tigher center channel
presentation. The Center Width range is 0 to 7 in single increments.
3-32
DIMENSION

DOLBY CONFIGURATION

MODE: DOLBY PLII MUSIC
Alters the perceived depth of the surround field by creating a
CENTER WIDTH:3
shallower presentation (F-1 to F-3) that appears to move the center
DIMENSION: 0
of the sound field toward the front of the room or a deeper
PANORAMA: OFF
presentation (R-1 to R-3) that appears to move the sound field
NIGHT: OFF
toward the rear of the room.
PANORAMA
Appears to increase the sound presentation along the sides of the
room by extending the stereo image to include surround channel
signals, which enhances the sense of surround sound by creating a
PLII, PLIIx
"wraparound" effect with side-wall imaging.
NIGHT
Adjusts the audio settings for Night mode. The Night mode uses
0 TO 7
special processing to preserve the dynamic range and full intelligibility
of a movie soundtrack while reducing the peak level. This prevents
abruptly loud transitions from disturbing others, without reducing the
sonic impact of a digital source. Use the MID setting for mild
compression and the MAX setting for more severe compression.
DIMENSION
SETUP
DOLBY CONFIG
SETUP
PANORAMA
DOLBY CONFIG
SETUP
DOLBY CONFIG
NIGHT
Harman Consumer Group, Inc.
R-1, R-2, R-3, O, F-1, F-2, F-3
OFF, ON
OFF, MID, MAX

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Performance series

Table of Contents