Mode Buttons; Front Panel Display; Ir Receiver; Volume Knob - JBL AV2 User Manual

®
JBL Performance™ Series AV2 Audio/Video Processor

1. FRONT PANEL DISPLAY

Use the front panel two-line display to view the current input
source, input type, listening mode, and volume level. The 2 x 20
character display also functions as a display for messages and
menus, one line at a time.

2. IR RECEIVER

The IR receiver receives infrared commands from the AV2 remote
control. Blocking the IR receiver will prevent the remote control
from functioning properly (unless using the optional RF-1
receiver).

3. VOLUME KNOB

Use the volume knob to adjust the volume level. The adjustable volume
range is -80 dB to +10 dB in 1 dB increments.
Note: The maximum volume level may be lower than +10 dB due to the
output level settings of the speakers. Refer to Section 3: Setup for more
information on setting the speaker output levels.
To adjust the Main Zone volume level:
Rotate the volume knob clockwise to increase or counterclockwise
to decrease the volume level in 1dB increments. The current
volume level is indicated on the bottom right side of the two-line
front panel display.
To adjust the Zone 2 volume level:
1. Press and hold the front panel Zone 2 input selection button that
corresponds with the current input source. For instance, if DVD is
the current Zone 2 input source, press and hold the DVD input
selection button in the Zone 2 area of the front panel.
2. While holding down the Zone 2 input button, rotate the volume
knob clockwise to increase the volume or counterclockwise to
decrease the volume. On the front panel two-line display, the
bottom left side displays that Zone 2 is selected and the bottom
right side indicates the current volume level.
Note: If you attempt to set the volume higher than the maximum or lower
than the minimum volume levels, the displayed volume level flashes.

4. MODE BUTTONS

Use the Mode buttons to scroll to the previous (
available listening mode. Scrolling the Mode button reveals the
entire list of listening modes available for the currently selected
input and mode family. For more information on selecting listening
modes, refer to Section 3: Setup.

5. MAIN ZONE INPUT SELECTION BUTTONS

Individually select each of the 12 inputs available in the Main Zone.
When an input is selected, a blue LED lights in the corresponding
input selection button. When the Main Zone is deactivated,
pressing a Main Zone input selection button activates the corre-
sponding input in the Main Zone.
When the AV2 is in Standby, pressing a Main Zone input selection
button powers on the AV2, selects the input in the Main Zone, and
turns off Zone 2.

6. ZONE 2 INPUT SELECTION BUTTONS

Individually select each of the 12 inputs available in Zone 2. When
an input is selected, an amber LED lights on the corresponding
input selection button. When Zone 2 is deactivated, pressing a
Zone 2 input selection button activates the corresponding input in
Zone 2.
Basic Operation
) or next ( )
2-3