Jbl Bassq Settings; Jbl Bassq Settings - JBL AV2 User Manual

Setup
running iPod is plugged into the dock. For more information about
the Dock input and controls, refer to Section 5: PC and Dock Controls.
Note: If the Main Zone is OFF when the AV2 is put into Standby, when the
iPod is plugged into the dock, the AV2 powers up but the Main Zone
remains OFF. At that point, the user must manually select the Dock input.
3-34
JBL B Q SETTINGS
ASS
The BassQ parameter is only used if the JBL BassQ automatic room
mode correction processor is also in use.
MAIN MENU SETUP
DISPLAY SETUP
AUDIO CONTROLS
VIDEO STATUS
SPEAKER/EQ SETUP
SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
BASSQ*: NO
*CHECK MANUAL FIRST
The BassQ parameter can be set to YES or NO. The parameter should
be set to NO, except when the system also contains the JBL BassQ
automatic room mode correction processor. In this case, setting the
BassQ parameter to YES optimizes the outputs of the AV2 for use with
the JBL BassQ system. The default setting for this parameter is NO.
Note: If the AV2 processor is returned to its factory default settings, this
parameter will need to be reactivated (set to YES) to be used with the JBL
BassQ system.
Harman Consumer Group, Inc.