Manual Speaker Setup - JBL AV2 User Manual

®
JBL Performance™ Series AV2 Audio/Video Processor

MANUAL SPEAKER SETUP

Selecting the SETUP menu SPEAKER/EQ SETUP menu, MANUAL option opens the MANUAL menu, which is used to manually set the speaker
distances, crossover points and output levels.
SETUP SPEAKER/EQ SETUP
AUTO SETTINGS
SPEAKER/EQ SETUP
SETUP
Loads the values from the active preset into the speaker crossover
points, distances or output level parameters. The Speakers (crossover
points), Speaker Distances and Output Levels menus all have an Auto
Settings parameter. All three are the same parameter, but each affects
the individual sub-menus separately and independently of each
other.
MANUAL
SPEAKERS
SPEAKER DISTANCES
OUTPUT LEVELS
OFF, ON
MANUAL AUTO SETTINGS
SPEAKER DISTANCES 1 SPEAKER DISTANCES 2
AUTO SETTINGS: OFF
SIDE LEFT: 0.0ft
UNITS: FEET
SUBWOOFERS: 0.0 ft
FRONT LEFT: 0.0 ft
CENTER: 0.0 ft
FRONT RIGHT: 0.0 ft
SIDE RIGHT: 0.0 ft
REAR RIGHT: 0.0 ft
REAR LEFT: 0.0 ft
OUTPUT LEVELS 1
OUTPUT LEVELS 2
AUTO SETTINGS: OFF
REAR LEFT: 0dB
INPUT: ALL
SIDE LEFT: 0dB
TEST TONE: AUTO
SUBWOOFER1: 0dB
FRONT LEFT: 0dB SUBWOOFER2: 0dB
CENTER: 0dB
FRONT RIGHT: 0dB
SIDE RIGHT: 0dB
REAR RIGHT: 0dB
If the Auto Settings parameter is set to ON, the parameters in that
menu cannot be manually changed until the Auto Settings
parameter is set to OFF.
Note: Any manual settings will be lost if the active preset settings are
loaded; if Auto Settings is set to ON in the Speakers, Speaker Distances or
Output Levels menus, then previous parameter values will be overwritten.
Setup
SPEAKERS
AUTO SETTINGS: OFF
FRONT L/R: 80Hz
CENTER: 80Hz
SIDE L/R: 80Hz
REAR/Z2 L/R: 80Hz
SUB/LFE LPF: 80Hz
SUBWOOFERS: 1
SUB HPF: 20Hz
SUB MODE: NORMAL
3-9