S-Video/Composite Input Connectors; Connector Array; Component Video Input Connectors; Digital Audio Input Connectors - JBL AV2 User Manual

Performance series audio/video processor
Table of Contents

Advertisement

Basic Operation
CAUTION!
Never make or break connections to the AV2 unless the
AV2 and all associated components are powered off.
1. 8-CHANNEL ANALOG AUDIO INPUT

CONNECTOR ARRAY

Provides 8-channel analog audio input via eight RCA connectors
labeled Front L/R, Center, LFE, Side L/R and Rear L/R. These inputs
are used to connect source devices such as high-resolution DVD
players, DVD-Audio, or SACD™ players with discrete analog audio
outputs. Depending on the source device in use, all eight
connectors may be used, although only the Front L/R, Center, Side
L/R and LFE are required for 5.1 analog audio signals.

2. DIGITAL AUDIO INPUT CONNECTORS

Provide digital audio input via four S/PDIF optical (TOSLINK) and four
S/PDIF coaxial (RCA) input connectors. Connectors are compatible
with most PCM, Dolby
®
Digital, and DTS

3. USB CONNECTOR

Provides a USB port to connect to a PC computer, enabling the user
to listen to audio from the computer through the AV2 processor.
The USB connector port is a "mini B" connector and requires a USB
cable (not included). See Section 5: PC and Dock Controls for more
information on the playback of computer audio.

4. IR INPUT CONNECTOR

Accepts input of IR signals from infrared distribution equipment via
one 3.5mm jack that accepts a stereo plug (Tip/Ring/Sleeve
2-6
®
sources.
connection) or mono plug (Tip/Sleeve connection).

5. S-VIDEO/COMPOSITE INPUT CONNECTORS

Provide the S-video and composite analog video inputs. Four
composite video connectors labeled 1 to 4 and four S-video
connectors labeled 1 to 4 are available.
6. S-VIDEO/COMPOSITE OUTPUT CONNECTORS
Provide the S-video and composite video outputs. One composite
video connector and one S-video connector are available.

7. COMPONENT VIDEO INPUT CONNECTORS

Provide inputs that can be used with any source device that is
equipped with analog Y/Pr/Pb or RGB component video outputs.
Three inputs, labeled Component Video 1 to 3, are supplied.

8. COMPONENT VIDEO OUTPUT CONNECTOR

Provides one component output that can be used with any device that
is equipped with analog Y/Pr/Pb or RGB component video intputs.

9. HDMI INPUT CONNECTORS

Provide two HDMI inputs for devices such as a DVD player or HDTV
tuner.

10. HDMI OUTPUT CONNECTOR

Provides one HDMI output for HDMI-equipped video monitors.
Harman Consumer Group, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Performance series

Table of Contents