Monitoring And Maintaining The Ip Network - Cisco WS-C3020 Software Configuration Manual

Chapter 34 Configuring IP Unicast Routing

Monitoring and Maintaining the IP Network

You can remove all contents of a particular cache, table, or database. You can also display specific
statistics. Use the privileged EXEC commands in
Table 34-6 Commands to Clear IP Routes or Display Route Status
Command
clear ip route {network [mask | *]}
show ip protocols
show ip route [address [mask] [longer-prefixes]] |
[protocol [process-id]]
show ip route summary
show ip route supernets-only
show ip cache
show route-map [map-name]
OL-8915-03
Table 34-6
Purpose
Clear one or more routes from the IP routing table.
Display the parameters and state of the active routing protocol
process.
Display the current state of the routing table.
Display the current state of the routing table in summary form.
Display supernets.
Display the routing table used to switch IP traffic.
Display all route maps configured or only the one specified.
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Monitoring and Maintaining the IP Network
to clear routes or display status:
34-37