Cisco VG224 - Analog Phone Gateway Hardware Installation Manual page 33

Installing the Cisco VG224 Voice Gateway
This chapter contains the procedures for installing your Cisco VG224 voice gateway and consists of the
following sections:
• Safety Recommendations, page 3-2
Site Log, page 3-3
•
• Keeping Track-Checklist, page 3-4
Mounting Tools and Equipment, page 3-5
•
• Unpacking and Inspection, page 3-5
Rack-Mounting the Chassis, page 3-6
•
• Wall-Mounting the Chassis, page 3-9
Bench-Top Installation, page 3-11
•
• Installing the Ground Connection, page 3-11
Connecting Cables, page 3-14
•
• Ports, Connectors, and Pinouts, page 3-20
Remote Terminal Connections (If Applicable), page 3-20
•
• Connecting Backup Power, page 3-21
While you do this installation, record your progress and site information. See the suggested format in
Tip
the "Keeping Track-Checklist" section on page
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
OL-5006-04
C H A P T E R
3-4.
Cisco VG224 Voice Gateway Hardware Installation Guide
3
3-1