Cisco VG224 - Analog Phone Gateway Hardware Installation Manual page 42

Wall-Mounting the Chassis
Note For attaching to a wall stud, each bracket requires two #10 wood screws (round- or pan-head) with #10
washers, or two #10 washer-head screws. The screws must be long enough to penetrate at least 3/4 inch
(20 mm) into supporting wood or metal wall stud.
For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and
Note
washers must be size #10.
Figure 3-8
•
Figure 3-8
1
Cisco VG224 Voice Gateway Hardware Installation Guide
3-10
shows the orientation required for installation.
Wall-Mounting the Chassis
3
2
4
Chapter 3 Installing the Cisco VG224 Voice Gateway
OL-5006-04