Bench-Top Installation; Installing The Ground Connection - Cisco VG224 - Analog Phone Gateway Hardware Installation Manual

Chapter 3 Installing the Cisco VG224 Voice Gateway
1
2

Bench-Top Installation

Verify that there is a suitable AC power outlet available.
Step 1
Do not plug this unit into an AC outlet that does not have a UL-certified receptacle that is properly tied
Caution
into building ground.
Step 2 Place the four rubber feet (from the accessory kit) in the four indentations on the underside of the
chassis.This helps provide proper airflow through and around the chassis.
Step 3 Place the Cisco VG224 voice gateway on a smooth, flat surface.
Do not place anything on top of the chassis that weighs more than 10 lb (4.5 kg). Excessive weight on
Caution
top can damage the chassis.

Installing the Ground Connection

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
AC connected units must have a permanent ground connection in addition to the power cable ground
Warning
wire. NEBS-compliant grounding satisfies this requirement. Statement 284
Warning Use copper conductors only. Statement 1025
You must connect the chassis to a reliable earth ground; the ground wire must be installed in accordance
with local electrical safety standards.
•
•
OL-5006-04
3
Wall Wall stud
Bracket 4 Keyhole for starter screw
For NEBS-compliant grounding, use size AWG 6 (13 mm
accessory kit.
For NEC-compliant grounding, use size AWG 14 (2 mm
user-supplied ring terminal.
2
) wire and the ground lug provided in the
2
) or larger wire and an appropriate
Cisco VG224 Voice Gateway Hardware Installation Guide

Bench-Top Installation

3-11