Hardware Installation; Attaching The Camera To The Stand; Side Panel - TRENDnet TV-IP300 User Manual

Side Panel

DC-Iris Connector
The camera supports additional DC-Iris lens, and provides the
power and control signal required for adjusting the lens through
this DC-Iris connector (4-pin). You can attach any standard DC-
Iris lens for specific purpose, such outdoor applications.
DC-Iris Connector
16
I
NSTALLATION

Attaching the Camera to the Stand

The camera comes with a
camera stand (optional), which
has a swivel ball screw head that
can be attached to the camera 's
screw hole on the up (or bottom)
panel. Attach the camera to the
stand and station it for your
application. There are three
holes located in the base of the
camera stand, allowing
camera to be mounted on the
ceiling or any wall securely.
H
ARDWARE
the
17
2