RS485 Port
The RS485 Port window contains the control settings for external
device through the I/O port. You have to configure the respective
settings in this window.
Click RS485 Port in the top menu bar and the RS485 Port
window will appear as below:
Check the Enable option to enable the function of your camera,
and configure the related settings in the following fields. When
you enable the port function, some control buttons will be added
on the Home screen of Configuration Utility (as shown below).
44
Port Setting
Select the proper values from the pull-down menus in this
field, including Baud rate, Data bit, Stop bits, and Parity bit.
Command Setting
According to the function of the external device you
connected, you can customize more buttons for your need.
Please note that the setting value in Command is provided
by the connected external device.
Control buttons
45