TRENDnet TV-IP300 User Manual page 18

•
Local FTP server port - The standard port number for
the FTP server is Port 21, and it's also the default setting.
If the FTP server uses a specific port, please confirm the
IT manager.
•
1st/2nd FTP server - The IP Address of the target FTP
server.
•
1st/2nd User Name/Password - Enter the user name and
password in the two fields to login the FTP server.
•
1st/2nd FTP remote folder - Enter an existing folder
name in this field, and the images will be uploaded to the
specified folder.
- HTTP: The default HTTP Port is 80.
- Streaming: Configure the transmission of streaming data
within the network.
•
Control channel port - The default is 8481.
•
Video channel port - The default is 8483.
•
Audio channel port - The default is 8482.
NOTE: When transferring the streaming data, the camera will
check the HTTP port (port 80) first. If the port is allowed to use,
the streaming data will automatically switch to port 8481
(control data), 8483 (video data) and 8482 (audio data). If not,
the data will be transferred through port 80 only; then, the
camera cannot send the images with sound (without audio
data).
34
Video
The Video window contains commands to provide the settings for
the images captured by the camera.
Click Video in the top menu bar and the Video window will
appear as below:
Video Resolution
Select the desired video resolution from the two formats: CIF and
QCIF. The default setting is CIF.
TIP: CIF is based on progressively scanned format (@ 30
frames/sec) with 352x 240 (NTSC) or 352x288 (PAL), while
QCIF is 176x120 (NTSC) or 176x144 (PAL). In addition, CIF
compatibility was made optional but QCIF compatibility is
mandatory, i.e., all codecs must be able to operate with QCIF.
CIF is primarily for videoconferencing, while QCIF is suitable
for a desktop videophone.
35