Rear Panel - TRENDnet TV-IP300 User Manual

2. Power LED
The Power LED is positioned on the far right side of the camera's
lens while facing the camera. It is located on the right of the Link
LED.
A steady Blue light confirms that the camera is powered on.
NOTE: There are two settings for the Link/Power LED to
control the light illumination for monitoring purpose from
Normal/OFF. Please refer to the Web Configuration section for
detailed information and usage.
3. Internal MIC
The built-in omni-directional microphone allows the camera to
receive sound and voice.
4. Lens Assembly
The camera is equipped with a wide-angle lens with rotational
focus control, and provides an infrared function that allows your
camera to capture clear image in a dark environment. The lens
assembly of the camera can be removed and replaced with any
standard CS-mount lens. Inside the lens assembly is a CCD chip,
which is used to capture images.
assembly and the CCD chip are very sensitive to dirt and dust.
Please note that the lens
12

Rear Panel

⑦
DC Power Connector
⑥
DIP Switch
⑤
④
Iris Level
1. External Antenna (for wireless model)
The adjustable external antenna allows you to adjust its position
to obtain the maximum signal.
2. Reset Button
This button is used to reload the default settings of the device:
1. Press and hold the Reset button and disconnect the AC
adapter.
2. Keep the button being pressed and re-connect the AC adapter.
3. Wait for 5 seconds.
4. Release the button to reload the default settings.
①
External Antenna
(for wireless model)
②
Reset Button
③
Network Cable
I/O Connector
Connector
13