System Administration - TRENDnet TV-IP300 User Manual

System Administration

Under the Welcome screen of the Configuration Utility, click
System Administration to enter the administration window that
contains the settings required for the camera in the top menu bar,
including System, Video, Users, DateTime, Motion detection,
Application, RS485 port, Information, Tools, and Home.
28
System
The System window contains commands for settings that are
required for inputting key details to set up the camera for
operation.
TIP:
1. Once you have changed the settings in each option, click
Save to store the settings, or Cancel to abandon. During the
configuration, whenever you click Home in the top menu
bar will make you return to the Welcome window.
2. The System window is the initial window when you click
the System Administration option.
click the System item in the top menu bar to enter the
System window when you are in other configuration
windows.
Camera Name
This field is used for entering a descriptive name for the device (a
maximum of 32 characters, printable ASCII code).
Location
This field is used for entering a descriptive name for the location
used by the camera.
Admin
This field is used for entering the Administrator password to
access the System Administration settings. Enter the password in
the Admin Password box, and then enter the same one again in
the Confirm Password box to confirm the password.
Alternately, you can
29