TRENDnet TV-IP300 User Manual page 19

Frame Rate
Select the optimal setting depending on your network status.
Please note that the higher setting can obtain better quality;
however, it will use more resource within your network. The
available settings are 1, 3, 7, 15, 25 and 30 (for PAL system, the
settings are 1, 3, 7, 15 and 25).
Video Quality
You can select the optimal setting depending on Fix bit rate or
Fix quality. Please note that the higher setting can obtain better
quality; however, it will use more resource within your network.
Up/Down reversal and Left/Right reversal options allow you to
change the display of image.
Click Image Setting button to bring up the following window,
which allows you to adjust the image setting:
When completed, click Save.
- Brightness: Adjust the
brightness level.
Contrast: Adjust the contrast
-
level.
Saturation: Adjust the colors
-
level.
- Hue: Adjust the hue level.
36
Users
The User window contains commands that allow the system
administrator to assign legal users who are permitted to monitor
the camera from the remote site.
Click Users in the top menu bar and the Users window will
appear as below:
Add User
- User Name: Enter the user name in this field (a maximum of
12 characters, printable ASCII code).
A maximum of 10 users names are allowed; however, each
users name must be different. Each user name can be used as
a group given the password. For example, if the User Name
is "Guest" and the User Password is "Guest", anyone can
access the camera with these details used as a group of users
under the User Name "Guest".
NOTE: To get a better quality of video images and sounds
through the network or Internet, the recommended users
connected simultaneously should not exceed 10.
37