Table of Contents
Advertisement
Rear Panel Components
The power connection to the camera when fitted with the Infrared lens is split between the camera
body and lens using the power connection adapter cable attached to the infrared lens. All other
cables connect to the camera at the rear panel.
Antenna (TV-
IP612WN only)
Ethernet
Port
WPS (TV-
IP612WN only
Power
WPS
Power receptacle
Ethernet Port
IO Connectors
AV Out / Speaker
Out
TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera
Connectors
Rear Panel view of TV-IP612P/W
Press this button to enable Wireless Protected Setup so that you can
automatically connect with a WPS enabled wireless device such as a
router or access point.
Connect power adapter shipped with the camera and plug into suitable
power source.
Connect to Ethernet LAN. The port is auto MDI-II/MDI-X and auto-
negotiation for port speed.
This terminal block has one input pair and one output pair of pins to
connect external input/output devices.
Connect this Audio/Video output jack with the supplied cable so that you
can view or record the live video feed on a local TV or VCR. You can also
connect audio to a local speaker for local audio reproduction.
IO
`
Antenna (TV-
IP612WN only)
Reset button
Microphone
AV OUT
7
Advertisement
Table of Contents
