Port-Based Vlan - TRENDnet TPE-80WS User Manual

2.1.3 Port-based VLAN

Port-based VLAN is a kind of VLAN which is a group of ports marked as a kind by group ID,
different VLAN ( different ID ) can't communicate to each other. Before the setting, user must
be aware of that there is a default Port-based VLAN, his group ID is 1, so, if user wants to set
another new port-based VLAN, better set another group ID rather than 1. After press " Apply
" button, the screen will show a new port-based VLAN if he add a new group or screen will
delete a port-based VLAN if he delete a group. The important thing is that port-based VLAN
is valid only within same device, it will never be valid cross the devices. A default diagram is
shown below.
Port-based VLAN (User Group) Configuration
Choose and click the ports you want to group, for example, choose port 1, port 2 and set their
group ID 2, then press "Apply", after execution, diagram will shown below
Port-based VLAN Group (User Group) Table
No. Group ID
1
1 1
Add/Edit a VLAN (User) Group
Group ID
1 2
1
Refresh
Member Port
2 3 4 5
Member Port
3 4 5 6
Delete Apply
10
6 7 8
7 8