TRENDnet TPE-80WS User Manual page 13

advanced tag-VLAN application, here below are explanation when entering the " Port Config ",
they are:
1. VLAN Aware mode:
Enable - Strip VLAN tag from received frame, and insert VLAN tag in transmitted frame
except ingress frames which tag VID = PVID
Disable – default state, this means, switch doesn't do VLAN tag stripping and insertion.
2. Ingress filtering:
Enable - Check ingress frame VLAN ID. Ingress frame will be dropped if frame's VID is not
the same as the VID of the ingress port which belongs to a member of a VLAN
group
Disable – Don't do ingress VLAN frame checking, the frame will be flood if VID is not the
same
3. Accept Packet Type:
ALL - Accept all ingress frames
Tagged only - Only accept ingress frames with VLAN tag
4. Port VID:
Set port VLAN ID for untagged ingress frames. Set "None" for trunk port member.
VLAN aware
Port
Enabled
1
2
3
4
5
6
7
Tag VLAN Per Port Configuration
Ingress Filtering
Enabled
Acceptable
Packet Type
All Tagged Only
All Tagged Only
All Tagged Only
All Tagged Only
All Tagged Only
All Tagged Only
All Tagged Only
13
Port VID
1
1
1
1
1
1
1